powersave mode does not revert after full charge

Moderators: garrywadams, Aathif Mahir, Sabertooth

Post Reply
no avatar
StevenLondon
Posts: 2
Joined: Thu Nov 03, 2016 10:02 pm
Cash on hand: Locked

powersave mode does not revert after full charge

Post by StevenLondon » Tue Nov 22, 2016 9:48 pm

I noticed that when the watch enters powersave mode at 20% or less, and I place the watch on the charge stand, and after a full charge it will NOT exit powersave mode. sometimes its hard to wake up too during that time.

no avatar
Candid
Posts: 114
Joined: Fri Nov 04, 2016 7:38 pm
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by Candid » Tue Nov 22, 2016 10:25 pm

+1

no avatar
hansvanthag
Posts: 27
Joined: Wed Oct 05, 2016 6:33 pm
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by hansvanthag » Thu Nov 24, 2016 5:09 pm

Just use tickle strip to select option and then double tap it to disable powersafe

no avatar
willb55
Posts: 3
Joined: Thu Nov 24, 2016 8:47 pm
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by willb55 » Wed Dec 07, 2016 10:01 am

Hmmm I'm having this problem too.
If I single click the crown I get the powersave watchface. If I long press the crown I get the settings screen but none of the options work. I can use the tickle to scroll up and down but no buttons work. I have the crown set for left hand, right crown.
It does seem to eventually fix itself and show my designated watchface but I haven't worked out how long that takes or if it is random.

no avatar
Pritel03
Posts: 6
Joined: Tue Nov 15, 2016 1:32 am
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by Pritel03 » Wed Dec 07, 2016 8:24 pm

I ran into this same issue yesterday. Watch went into power saving mode and would not revert back even when I used the crown to disable power saving mode. I ended up charging the watch for a little bit and then restarting it to get back to normal. I'm on firmware 4.4.1_intl

no avatar
Sleepy
Posts: 13
Joined: Sun Nov 20, 2016 9:04 am
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by Sleepy » Thu Dec 08, 2016 9:28 pm

Will be fixed with 4.5.0 according to the firmware release information I saw for the chinese version.

no avatar
willb55
Posts: 3
Joined: Thu Nov 24, 2016 8:47 pm
Cash on hand: Locked

Re: powersave mode does not revert after full charge

Post by willb55 » Sat Dec 10, 2016 9:30 pm

Sleepy wrote:Will be fixed with 4.5.0 according to the firmware release information I saw for the chinese version.
Sounds good. Any idea when that update will be released?

Post Reply