Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Moderators: garrywadams, Aathif Mahir, Sabertooth

no avatar
lKinder_Bueno
Posts: 1
Joined: Sat Nov 05, 2016 8:20 am
Cash on hand: Locked

Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by lKinder_Bueno » Sat Nov 05, 2016 8:25 am

Hi guys,
I want to show you how install watchmaker on our Ticwatch 2 without using an old Ticwear client.
And you can use EVERY version of WatchMaker.
Just follow the tutorial video :D

DOWNLOAD LINK: https://mega.nz/#!G40TGRjQ!3IxcqK7Ps9TV ... FWxLaZmt3c

TUTORIAL LINK: https://www.youtube.com/watch?v=yoa2jENRhmg

no avatar
jepe63
Posts: 5
Joined: Fri Nov 04, 2016 7:14 am
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by jepe63 » Sat Nov 05, 2016 10:41 am

Hi , did everything like mentioned , no errors , still no watchmaker visible , how can i check if its on the watch ?

no avatar
Candid
Posts: 114
Joined: Fri Nov 04, 2016 7:38 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by Candid » Sat Nov 05, 2016 5:40 pm

Try 'adb shell pm list packages' this should show you a list of the installed packages. If there is an entry with 'slide.watchFrenzy.premium' it should be installed.

You may uninstall the package, reboot and reinstall it:
adb shell pm uninstall slide.watchFrenzy.premium
adb reboot

no avatar
glukkkk
Posts: 2
Joined: Sat Nov 05, 2016 8:44 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by glukkkk » Sat Nov 05, 2016 8:46 pm

Everything works for me, however only 3 watchfaces were copied to my watches, though there are more in the folder copied from my phone.

Any chance to use watchmaker easily in the future like a standart app?

no avatar
jepe63
Posts: 5
Joined: Fri Nov 04, 2016 7:14 am
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by jepe63 » Sun Nov 06, 2016 8:55 am

Candid wrote:Try 'adb shell pm list packages' this should show you a list of the installed packages. If there is an entry with 'slide.watchFrenzy.premium' it should be installed.

You may uninstall the package, reboot and reinstall it:
adb shell pm uninstall slide.watchFrenzy.premium
adb reboot


yep , it worked , thx !!!!!

no avatar
aoleg
Posts: 9
Joined: Wed Nov 02, 2016 4:02 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by aoleg » Sun Nov 06, 2016 9:44 am

Worked, but while any WatchMaker face is active, the "swipe from right to left" gesture is disabled system-wide. I had to uninstall WatchMaker.

After this, I encountered another problem: my watch no longer turns off the display when charging. I even tried a factory reset (twice already), but the watch still keeps charging with display on. (I know about the corresponding Developer setting, and made sure it's disabled).

no avatar
Grunn
Posts: 1
Joined: Sun Nov 06, 2016 7:38 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by Grunn » Sun Nov 06, 2016 7:52 pm

Great tutorial thanks!.. got it all working. 8-)

I'm also experiencing the same problem while trying to access the menu. The "swipe from right to left" is partially blocked/disabled by the WatchMaker-face... you can access the menu by swiping (right to left) just above/below the (vertical-)middle.

WatchMaker uses that area as a shortcut to access "their" watch faces... is it possible to disable that feature and use the entire area to access the menu.

no avatar
JosephD1014
Posts: 3
Joined: Mon Nov 07, 2016 4:29 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by JosephD1014 » Wed Nov 09, 2016 8:55 pm

I was able to disable the dead zone in the swipe right to left by doing the following:
On phone in watchmaker app:
* settings -> watch -> watch selector -> DISABLE
Also in watch settings, I set my watch to LG Watch Urbane.
Then I also uploaded a new watch face.

Now no dead zone which is great because it was ALSO causing there to be a big dead zone on the pull-down-from-the-top cards.

Edit: If anyone can figure out the "screen never sleeps while charging" issue then I think we'll be golden!

no avatar
Casinada
Posts: 27
Joined: Tue Nov 08, 2016 4:37 am
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by Casinada » Thu Nov 10, 2016 6:56 am

Joseph,
I assume that you disable that setting on the phone and then export the beautifulwatches folder to the watch again?
Thank you
Casi

no avatar
Candid
Posts: 114
Joined: Fri Nov 04, 2016 7:38 pm
Cash on hand: Locked

Re: Install WatchMaker on Ticwatch 2 (every version) in LESS THAN 5 MINUTES

Post by Candid » Thu Nov 10, 2016 10:54 am

JosephD1014 wrote:Edit: If anyone can figure out the "screen never sleeps while charging" issue then I think we'll be golden!

Thank you for the tip with the "deadzone".

Concerning screen never sleeps while charging did you uncheck the option "Screen always o.." in the developer options? This worked for me.

Post Reply