(SOLVED) Ticwatch e wall chargers don't work

Moderators: garrywadams, Chintannapster, Aathif Mahir, Sabertooth

Post Reply
no avatar
Posts: 3
Joined: Mon Dec 24, 2018 1:01 am
Cash on hand: Locked

(SOLVED) Ticwatch e wall chargers don't work

Post by nickhell » Tue Jan 08, 2019 8:44 pm

Hi, I have a rather new ( 2 weeks) ticwatch e and I only can charge it on a USB port in a computer. And not in all USB ports, only some work.
I have tried also several wall chargers from old devices ( 1amp it's the lower I have) but none work.
Does it happen to you too or have I a defective device/cable?

It was the charging cable. I looked at the contacts of the cable and there was a tiny layer of plastic covering the right side of the contacts (see pic). It was attached to the inside so Its a manufacturing defect. I used a lollipop plastic stick which I previously had made plane to "carve" a bit that plastic to the back of the pins. Now it works with all my chargers despite Amps. 1; 2,1, etc.
Make sure you unplug the cable from outlet before fixing!!!!!!

I hope I dont burn my house because of this MOBVOI!!!!!!
IMG_20190109_151056.jpg (1.18 MiB) Viewed 420 times

Post Reply